• ¾ Hp (0.56 kW) Vertex HighFlow™ Series
• Vertex SafeStart™ Technology
• 5.6 CFM, 25 PSI, 115v or 230v
• Highest flow rate of any compressor in its class
• Thermal overload protection
• 2-4 year extended duty cycle between scheduled maintenance
• Full 2-year warranty

¾ Hp (0.56 kW), 115v, 5.6 CFM, 25 PSI, single phase, twin cylinder piston type compressor. Also available in 230 volt 50-60 Hz. UR, CE, CSA listed and built for continuous 24/7 operation. Super-duty Brookwood HighFlow™ compressors incorporate upgraded rotors, stators, bearings and capacitors and are thermally protected, oil-free, and require no lubrication; just periodic replacement of air filter. Extended duty cycle is approximately 2 to 4 years for compressor service, about 2 to 4 times the duty cycle of ordinary piston and rotary vane compressors. All new Brookwood™ HighFlow™ compressor systems carry a 2-year warranty.

• Class "A" GFCI protection on all 115V circuits
• Powder coated aluminum for a durable attractive finish
• High capacity 290 CFM fan
• Easy access design with barrel lock for security
• Easy plug-in connection to waterside electrical service
• Heavy duty mounting pad included
• 5-year warranty

Enclosure comes equipped with barrel lock for security, fully gasketed and constructed of aluminum with gray electrostatically-bonded powder coating to provide lifetime warranty against rust. Enclosure furnished with stamped ventilation grills to insure forced air circulation and an integral cooling fan with thermal protection, producing 290 CFM to guard against excessive compressor operating temperatures. This system is equipped with Vertex SafeStart™ technology allowing auto restart under maximum rated pressure without motor damage. Cabinet provided with HDPE mounting pad (24" x 24" x 2"). 115 volt enclosures come equipped with a class A GFIC circuit protection for all electrical components. 230 volt systems require the purchaser to provide GFIC protection on their electrical supply circuit.

• Tested system pumping rate,up to 14,300 GPM
• Eight 9" flexible membrane disks with MicronBubble™ technology
• Self-cleaning and low maintenance
• Rugged EPDM construction
• Vacuum formed and sonic welded HDPE base unit
• Lipped edge prevents sinking into soft bottom sediments
• 5-year warranty

• Over-sized 0.58" ID for high flow
• Heavy duty wall thickness for durability
• Self-weighted for easy installation
• Available in 100 and 500 feet increments
• 15-year Vertex warranty

Self-weighted, direct burial submersible tubing for connection from compressor to diffuser stations. Tubing is flexible PVC composite construction for use with standard PVC solvent weld cement and 0.5" insert fittings. Tubing has a smooth walled 0.58" I.D. for extra high flow rates with minimum friction loss to reduce backpressure and extend compressor life. 0.235" wall thickness provides long-term durability and protection against kinking and punctures. BottomLine™ tubing remains flexible in cold temperatures for easy year round installations.